Kaul, Sudhir

wcu

There are 6 item/s.

TitleDateViewsBrief Description
An experimental analysis of magnetorheological (MR) damping for vibration mitigation 2015 2630 Magnetorheological (MR) dampers have emerged as a viable means of semi-active damping in multipleindustry applications. The semi-active nature of these dampers is a significant attribute since the damperfunctions as a passive damper in the event of a...
Application of magnetorheological dampers in motorcycle rear swing arm suspension 2015 2227 Magnetorheological (MR) fluid is a smart fluid containing ferrous particles that allow it to change its apparent viscosity in the presence of a magnetic field. Dampers consisting of MR fluids provide a means of active damping by using a current input...
Comparison between the dynamic response of selective laser melting (SLM) parkts and conventionally manufactured parts 2016 1231 Selective Laser Melting (SLM) is a relatively new manufacturing process in additive manufacturing (commonly referred to as 3D printing). The process uses a laser sintering technique to build metal parts layer by layer by using the raw material in a p...
Slider crank mechanism for wave energy conversion (WEC): an experimental study 2018 911 As more and more sources of renewable energy are being actively explored, there is a need for finding efficient means of converting energy into usable forms. Wave energy is one significant source of renewable energy that harnesses the movement of oce...
Process parameter influence on high cycle fatigue life of direct metal laser sintered parts 2019 114 Direct metal laser sintering (DMLS) is a relatively new additive manufacturing (AM) technique. This manufacturing process involves fusing powdered metal layer by layer by using a high-powered laser. Although AM is expected to significantly transform ...
Damage Detection in Direct Metal Laser Sintered Parts Using Vibration Mode Shapes 2019 133 Direct metal laser sintering (DMLS) is an additive manufacturing process that can be used to manufacture complex parts that are difficult or impractical to produce using traditional methods. However, this relatively new technology does not have the s...